Apple Final Cut Pro 7 - Manual (Page 195)

SCART
Consumer PAL equipment sometimes has a special connector called a SCART connector.
A SCART connector has multiple pins that run composite, component RGB, and stereo
audio in one bundle. SCART input or output can be broken up into individual connections
using special adapters available from video and home electronics stores.
SCART connector
FireWire 400
FireWire 400, also called IEEE 1394a or i.LINK, is the consumer and professional standard
for formats such as DV, DVCAM, DVCPRO, DVCPRO 50, DVCPRO HD, and HDV. FireWire is
an inexpensive and easy way to capture and output high-quality digital video using a
variety of camcorders and decks and is capable of data rates as high as 400 Mbps. Standard
FireWire cables can be up to 4.5 meters long.
There are two kinds of FireWire connectors: a 4-pin connector (typically found on video
equipment such as camcorders or decks) and a 6-pin connector (used for computer
equipment). However, some newer video equipment uses the 6-pin connector, and some
video interfaces use the 4-pin connector. See your equipment’s documentation for more
information.
FireWire 400 (4-pin)
FireWire 400 (6-pin)
FireWire 800
FireWire 800, also called IEEE 1394b, is the next generation of FireWire after IEEE 1394a, a
higher-bandwidth version capable of data transfer speeds of up to 800 Mbps. FireWire
800 is also capable of supporting cable distances of up to 100 meters.
9-pin-to-4-pin and 9-pin-to-6-pin FireWire 400 to FireWire 800 cables are available to
connect older devices to a FireWire 800 interface.
FireWire 800 (9-pin)
Note: FireWire 800 is commonly used to connect hard disks and other data peripherals
to your computer, but this connector is rarely used to connect video devices.
195 Chapter 12 Connecting Professional Video and Audio Equipment