Apple Final Cut Pro 7 - Manual (Page 285)

6 Drag in the Browser to select all the markers.
7 Choose Modify > Make Subclip.
Note: If you gave your markers new names, your subclips will use them.
All of the material
between the markers
you selected should
now appear as subclips.
The subclips appear in addition to the original clip with the markers. You can rename the
subclips, if you want. You can review the subclips, deleting any clips you might not need.
If you do remove unused clips, you can use the Media Manager to remove your unused
footage from disk, leaving the media for your remaining subclips alone. For more
information, see
“Overview of the Media Manager.”
Batch Capturing Clips
To batch capture, your device must support remote device control and your clips must
have timecode numbers that accurately match the timecode numbers on your tape. Most
audio CD players, VHS decks, and other consumer equipment cannot be remotely
controlled and do not have timecode, so batch capturing from these devices is not
possible. For more information about device control, see
“Device Control Settings and
Presets.”
285 Chapter 18 Capturing Video from Tape