Apple Final Cut Pro 7 - Manual (Page 261)

• Set Marker In: Click this button to set a marker In point, or enter a timecode number in
this timecode field.
• Set Marker Out: Click this button to set a marker Out point, or enter a timecode number
in this timecode field.
• Update: To update a marker in the list, click to select it, make your changes, then click
Update. The marker in the list then displays the new information.
• Marker list: Displays all markers and associated information for the current clip.
Clip Settings Tab in the Log and Capture Window
Use this tab to choose which video and audio tracks you capture from tape. You can
capture video only, audio only, or both video and audio, and you can specify which audio
channels you capture. You can also adjust video levels for each clip using the Waveform
Monitor and Vectorscope; audio levels can be monitored using the audio meters. You
can also monitor the incoming audio signal by selecting the Preview option. For more
information, see
“Selecting Which Tracks to Capture.”
Note: Video levels can only be adjusted for analog video interfaces.
261 Chapter 16 About the Log and Capture Window