1 troubleshooting symptom chart, Stabil-trak, Troubleshooting symptom chart -13 – Lull 944E-42 Service Manual User Manual

Page 225

Advertising
background image

10-13

944E-42

Stabil-TRAK™ System

10.5

STABIL-TRAK™

HYDRAULIC CIRCUIT OPERATION AND TROUBLESHOOTING

The function of the Stabil-TRAK™ system varies under
different operating conditions. The basic modes include
the FREE PIVOT MODE, SLOW PIVOT MODE and
LOCKED MODE.

The hydraulic operation and troubleshooting information for
each of these modes are described below.

10.5.1

Troubleshooting Symptom Chart

Symptom

Conditions

Reference

With the boom below 40°, when
swaying the frame to the right, the left
front tire comes off the ground.

Ignition ON, engine running

Boom angle is below 40°

Travel select lever is in (F) FORWARD or
(R) REVERSE

Park brake OFF

Service brake DISENGAGED

Refer to Section 10.5.4, “Hydraulic Circuit
Operation - Free Pivot Mode, Rod Oil Out,”
and Section 10.5.5, “Hydraulic
Troubleshooting - Free Pivot Mode, Rod
Oil Out.”

With the boom below 40°, when
swaying the frame to the left, the right
front tire comes off the ground.

Ignition ON, engine running

Boom angle is below 40°

Travel select lever is in (F) FORWARD or
(R) REVERSE

Park brake OFF

Service brake DISENGAGED

Refer to Section 10.5.6, “Hydraulic Circuit
Operation - Free Pivot Mode, Base Oil Out,”
and Section 10.5.7, “Hydraulic
Troubleshooting - Free Pivot Mode,
Base Oil Out.”

While traveling, ride feels spongy
(riding on 3 wheels).

Ignition ON, engine running

Boom angle is above 40°

Travel select lever is in (F) FORWARD or
(R) REVERSE

Park brake OFF

Service brake DISENGAGED

Refer to Section 10.5.8, “Hydraulic
Circuit Operation - Slow Pivot Mode, Rod
Oil Out,”
and Section 10.5.9, “Hydraulic
Troubleshooting - Slow Pivot Mode, Rod
Oil Out,” or Se
ction 10.5.10, “Hydraulic
Circuit Operation - Slow Pivot Mode,
Base Oil Out,”
and Section 10.5.11,
“Hydraulic Troubleshooting - Slow Pivot
Mode, Base Oil Out.”

Stabil-TRAK™ lock light in the front
dash is not ON.

Ignition ON, engine running

Boom angle is above 40°

Travel select lever is in (N) NEUTRAL, or
Park brake ON, or Service brake ENGAGED

Refer to Section 10.5.12, “Hydraulic
Circuit Operation - Locked Mode,”
and
Section , “,” or Section 10.5.16,
“Hydraulic Troubleshooting - Locked
Mode, Will Not Frame Sway Left.”

With the boom above 40°, when
swaying the frame to the right, the left
front tire comes off the ground.

Ignition ON, engine running

Boom angle is above 40°

Travel select lever is in (N) NEUTRAL, or
Park brake ON, or Service brake
ENGAGED

Refer to Section 10.5.13, “Hydraulic
Circuit Operation - Locked Mode, Frame
Sway Right,” and
Section , “.”

With the boom above 40°, when
swaying the frame to the left, the right
front tire comes off the ground.

Ignition ON, engine running

Boom angle is above 40°

Travel select lever is in (N) NEUTRAL, or Park
brake ON, or Service brake ENGAGED

Refer to Section 10.5.15, “Hydraulic
Circuit Operation - Locked Mode, Frame
Sway Left,” an
d Section 10.5.16,
“Hydraulic Troubleshooting - Locked
Mode, Will Not Frame Sway Left.”

Advertising