Lukas LH2 - Manual (Page 7)

7
WARNING / CAUTION / ATTENTION!
The device is specified exclusively for the purpose represented in the operating
instructions (see Chapter "Proper use"). Any use that differs or goes beyond this is
considered improper. The manufacturer/supplier shall not be held liable for damages
resulting from improper use. The risk shall be borne solely by the user.
Proper use also includes heeding the operating instructions and complying with the inspection
and maintenance requirements.
Never work in a fatigued or intoxicated state!
Proper use 3.
Accessories and spare parts for the hydraulic equipment can be obtained from your
authorised LUKAS dealer!
The LUKAS hand pump is used for the operation of devices of the LUKAS Hydraulic tools.
They can be used as an additional or replacement drive source along with the LUKAS
hydraulic unit (e.g. in areas at risk for explosion).
Use with equipment of other manufacturers is possible, but requires technical testing and
approval of LUKAS on a case-by-case basis.
WARNING / CAUTION / ATTENTION!
Always note the product limitations with respect to operating pressure, load limit
values and operating conditions. The operating pressure should not be higher
than the lowest maximum operating pressure of any system components.
The operating pressure should NEVER be set higher than that which is specified
in the "Technical Data" chapter. A higher setting may cause property damage
and/or injuries.
Make sure that the usable capacity of the hand pump (see chapter "Technical
Data") is sufficient for operating the connected cylinders or devices.
The required hydraulic fluid operating quantity can be found in the chapter
"Technical Data" or in the operating instructions of the devices to be operated.