Snorkel XT24SD-sn000001+ - Manual (Page 10)

1/31/2008 - 14 -
Do not push off or pull toward any object outside of the platform.
Do not alter or disable machine components that in any way affect safety and
stability.
Do not modify or alter an aerial work platform. Mounting attachments for
holding tools or other materials onto the platform, toe boards or guardrail
systems can increase the weight in the platform and the surface area of the
platform or the load.
Do not replace items critical to machine stability with items of different weight
or specification.
Do not tie the platform to adjacent structures.
Do not place loads outside the platform perimeter.
Do not sit on, stand on, or climb on the platform guardrails. Maintain a firm
footing on the platform floor at all times.
Do not climb down from the platform when raised.
Do not operate the machine
unless the guardrails are properly
installed and the entry is secured
for operation. Attach the
platform entry chain before
operating or if the platform is
equipped with a gate, close and
latch the gate before operating.
Do not lower the platform unless
the area below is clear of
personnel and obstructions.
Do not attempt to level or
operate with the scissors lift
connected to the towing vehicle.
Be sure that the platform
extension in retracted all the way
and locked in before exiting the
platform.
Deck Extension Lock