Alarms and alarm lights – Snorkel XT24SD-sn000001+ User Manual
Page 22
1/31/2008
- 26 -
ALARMS AND ALARM LIGHTS
DOWN ALARM
When the platform is being lowered the alarm horn is activated. The purpose for
this is to warn personnel to stand clear of the scissors lift.
OUT OF LEVEL ALARM
If the alarm light is flashing ½ second on and ½ second off the out of level alarm is
on. With „OUT OF LEVEL ALARM‟ active the scissors lift is not level. See leveling
procedure.
PLATFORM OVERLOADED
If „OVERLOADED‟ LED is lit the weight rating for the load has been exceeded. The
operator should lower the loading to below the maximum rating. The lift will not
operate in over-loaded condition if it has the optional overload sensing device.
LEG POSITION
There are four outrigger position indicating lights. These lights must be on to
operate the machine. Exception, the scissors lift may be equipped with the variable
height option. These machines will have a switch on the control box that allows
operation at a lower height if turned on. The machine is stable to 12 feet (3.65
meters) with the outrigger legs in position. If the machine is not equipped with the