Snorkel XT24SD-sn000001+ - Manual (Page 21)

1/31/2008 - 25 -
Machine controls with option “variable height”
at ground level
Your TP 7000 or TP 9000 can be equipped with a variable height
selector option. Activation of this feature is achieved by turning the
selector switch to the “variable height position.” Variable height
selection gives you the option to operate the machine with the
outriggers in the “in” or at their narrowest position. This feature still
requires that the outriggers “sense” pressure. The unit will not operate
if the outrigger pads are not firmly on the ground. With the selector
turned to the “variable height” position, you may safely operate the lift
to a height of twelve (12) feet. The machine will automatically stop
raising at the twelve foot level. It is important to note: Your TP 7000
or TP 9000 will only raise to its full height with all four (4) of the
outriggers in the fully deployed (extended) position.