Snorkel XT24SD-sn000001+ User Manual
Page 20
Advertising
1/31/2008
- 24 -
o
The ground is soft and the machine settles as the outriggers are
extending.
o
The ground is too rough or un-level such that the legs (or leg) have
reached the extent of their travel. If this condition occurs the operator
must rectify the condition before trying again.
o
Failed or out of adjustment of scissors stack position switch.
o
Note: If the outrigger-legs do not retract, hold the red button in until
all the legs are retracted. Movement of the legs may be delayed for
30-seconds after the red button (retract) is pushed and held in.
o
If the machine is mal-functioning. The machine should not be used until
the malfunction is remedied.
Advertising