Snorkel XT24SD-sn000001+ - Manual (Page 35)

1/31/2008 - 39 -
The owner shall not modify or concur in modification or alteration to the aerial platform without
the modifications being approved and certified in writing by the manufacturer.
The owner shall comply with safety-related bulletins as received from the manufacturer or dealer.
Responsibilities of Users:
The information in this standard must be supplemented by good job management, safety control,
and the application of sound principles of safety, training, inspection, maintenance, application and
operation consistent with all data available regarding the parameters of intended use and expected
environment. Since the user has direct control over the application and operation of aerial
platforms, conformance with good safety practices in this area is the responsibility of the user and
the operating personnel, including the operator. Decisions on the use and operation of the aerial
platform must always be made with due consideration for the fact that the machine will be carrying
personnel whose safety is dependent on those decisions.
Users shall keep and maintain a copy of the operation and maintenance manual stored in the manual
tube of the machine. These manual(s) are considered an integral part of the aerial platform and are
vital to communicate necessary safety information to users and operators.
Users shall inspect and maintain the aerial platform as required to ensure proper operation. The
frequency of inspection and maintenance shall be determined by the manufacturer's
recommendation and be compatible with operating conditions and the severity of the operating
environment. Aerial platforms that are not in proper operating condition shall be immediately
removed from service until repaired. Repairs shall be made by qualified personnel and the repairs
shall be in conformance with the manufacturer's recommendations.
An inspection as outlined in the Operations and Maintenance Manual shall be conducted.
An annual inspection shall be performed on the aerial platform no later than 13 months from the
date of the prior annual inspection. The inspection shall be made by a person qualified as a
mechanic on the specific make and model of the aerial platform. The inspection shall include all
items specified by the manufacturer for an annual inspection as listed in the Operations and
Maintenance Manual.
Before each day or at the beginning of each shift, the aerial platform shall be given a visual
inspection and functional test including but not limited to the following:
a)
Operating and emergency controls
b) Safety devices
c) Personal protective devices, including fall protection
d) Air, hydraulic and fuel system leaks
e) Cables and wiring harness
f) Loose or missing parts
g) Tires and wheels