Axcess Network Receiver Installation Guide - Manual (Page 14)

Network Receiver
14 750.001.005 R04 © 2005 AXCESS Inc.
Figure 4 Select a Com port
5. Enter the following information in the Com Properties dialog box:
Bits per second 19200
Data Bits 8
Parity None
Stop Bits 1
Flow Control None
6. Click OK.
Receiver Responses
All commands have the basic format of
<number><character> .
It is unnecessary to press the Return key after typing the
command.
The Network Receiver will have the following responses when
a command is given:
Command Receiver Code Responses
00 Command completed successfully
05 Value entered is out of bounds
06 Invalid or unknown command