Product features, Current control, Velocity control – ElmoMC SimplIQ Digital Servo Drives-Whi-Solo Installation Guide User Manual
Page 12: Position control
Solo Whistle Installation Guide
Introduction
MAN-SOLWHIIG (Ver. 1.503)
12
The Solo Whistle drive is available in two models:
•
The standard model is a basic servo drive which operates in current, velocity and position
modes including PT & PVT. It operates simultaneously via RS-232 and CANopen DS 301, DS
305, DS 402 communications and features a third-generation programming environment.
•
The advanced model includes all the motion capabilities and communication options
included in the standard model, as well as advanced positioning capabilities – ECAM,
Follower and Dual Loop-and increased program size.
The two models operate with both RS-232 and CANopen communication.
2.2. Product Features
2.2.1.
Current Control
•
Fully digital
•
Sinusoidal commutation with vector control or trapezoidal commutation with encoder
and/or digital Hall sensors
•
12-bit current loop resolution
•
Automatic gain scheduling, to compensate for variations in the DC bus power supply
2.2.2.
Velocity Control
•
Fully digital
•
Programmable PI and FFW (feed forward) control filters
•
Sample rate two times current loop sample time
•
“On-the-fly” gain scheduling
•
Automatic, manual and advanced manual tuning and determination of optimal gain and
phase margins
2.2.3.
Position Control
•
Programmable PIP control filter
•
Programmable notch and low-pass filters
•
Sample time: four times that of the current loop
•
Fast event capturing inputs
•
PT and PVT motion modes
•
Fast output compare (OC)