ElmoMC SimplIQ Digital Servo Drives-Whi-Solo Installation Guide - Manual (Page 57)

Solo Whistle Installation Guide Technical Specifications
MAN-SOLWHIIG (Ver. 1.503)
www.elmomc.com
57
Elmo now offers a 200 VDC maximum output rating selection of Solo Whistle, according to the
following technical data:
Feature Units 3/200 6/200 10/200
Minimum supply voltage VDC 24
Nominal supply voltage VDC 170
Maximum supply voltage VDC 195
Maximum continuous power output W 480 960 1600
Efficiency at rated power (at
nominal conditions) % > 99
Maximum output voltage > 95% of DC bus voltage at f=22 kHz
Auxiliary power supply VDC 12 – 95 VDC (up to 2.5 VA inc. 5 V/200 mA for
encoder)
Amplitude sinusoidal/DC
continuous current A 3 6 10
Sinusoidal continuous RMS current
limit (Ic) A 2.12 4.24 7.07
Peak current limit A 2 x Ic
Digital in/Digital out/Analog in 6/2/1
4.4.1. Auxiliary Supply
Feature Details
Auxiliary power supply Isolated DC source only
Auxiliary supply input voltage 12 VDC to 95 VDC
Auxiliary supply input power <2.5 VA (this includes the 5 V/200 mA load for the
main encoder only)