ElmoMC SimplIQ Digital Servo Drives-Whi-Solo Installation Guide - Manual (Page 19)

Solo Whistle Installation Guide Installation
MAN-SOLWHIIG (Ver. 1.503)
www.elmomc.com
19
3.4. Motor Power – J8
Pin (J8) Signal Function
1 PTC Positive Temperature Coefficient
2 PTC Positive Temperature Coefficient
3 N/C Not Connected
4 N/C Not Connected
AC Motor DC Motor
5 PE Protective earth Motor Motor
6 M1 Motor phase Motor N/C
7 M2 Motor phase Motor Motor
8 M3 Motor phase Motor Motor
Pin Positions
Note: When connecting several drives to several motors, all should be wired in the same motor
phases and feedback sequences. This will enable the same SimplIQ program to run on all drives.