Main power – j1, N 3.5: p – ElmoMC SimplIQ Digital Servo Drives-Whi-Solo Installation Guide User Manual
Page 21
Advertising
Solo Whistle Installation Guide
Installation
MAN-SOLWHIIG (Ver. 1.503)
21
3.5. Main Power – J1
Pin (J1)
Signal
Function
1
VL+
Auxiliary supply input
2
PR
Auxiliary supply input return
3
VP+
Pos. power input
4
VP+
Pos. power input
5
PR
Power return
6
PR
Power return
7
PE
Protective earth
8
N/C
Not connected
9
N/C
Not connected
Pin Positions
Note:
When connecting several drives to several motors, all should be wired in the same
motor phases and feedback sequences. This will enable the same SimplIQ program to run on all
drives.
Advertising