Connecting motor power – ElmoMC SimplIQ Digital Servo Drives-Whi-Solo Installation Guide User Manual
Page 20
Advertising
Solo Whistle Installation Guide
Installation
MAN-SOLWHIIG (Ver. 1.503)
20
3.4.1.
Connecting Motor Power
Connect the M1, M2, M3 and PE pins on the Solo Whistle. The phase connection is arbitrary as
the Composer will establish the proper commutation automatically during setup. However, if
you plan to copy the setup to other drives, then the phase order on all copy drives must be the
same.
Figure 3: AC Motor Power Connection Diagram
Advertising