ElmoMC SimplIQ Digital Servo Drives-Whi-Solo Installation Guide - Manual (Page 18)

Solo Whistle Installation Guide Installation
MAN-SOLWHIIG (Ver. 1.503)
www.elmomc.com
18
3.3. Connector Types
The Solo Whistle has eight connectors (in the connectors version).
Pins Type Port Function
9 3.5 mm Pitch J1 Power Connector
12 2 mm Pitch J2 I/O
8 2 mm Pitch J3 Auxiliary Feedback
12 2 mm Pitch J4 Main Feedback
3 2 mm Pitch J5 RS232
3 2 mm Pitch J6 CANIN
3 2 mm Pitch J7 CANOUT
8 3.81 mm Pitch J8 Motor Connection
4 16 AWG (M1, M2, M3)
18 AWG (PE) Wires Motor Connection
Connector Locations
Table 1: Connector Types
Note: Throughout this chapter there are pairs of diagrams of the Solo Whistle. The diagram on
the left is the Solo Whistle with connectors, and the diagram on the right shows the product
with wires.