3 mounting the maestro – ElmoMC Multi-Axis Motion Controller-Maestro Installation Guide User Manual
Page 15
Advertising
Maestro Installation Guide
Installation
MAN-MASIG (Ver 1.33)
3-5
3.3
Mounting the Maestro
The Maestro has been designed for "in-back" mounting:
“Wall Mount” – screwed onto a panel
M4 round head screws, one through each opening in the heat sink, are used to mount the
Maestro (see the diagram below) on a wall.
Figure
3-1: Wall Mounting the Maestro
Advertising