3 analog input port – ElmoMC Multi-Axis Motion Controller-Maestro Installation Guide User Manual
Page 23
Advertising
Maestro Installation Guide
Installation
MAN-MASIG (Ver 1.33)
3-13
3.5.3
Analog Input Port
The Analog Input port has a 15-pin high density D-Sub socket. When assembling this I/O
cable, follow the instructions in Section
3.5 (D-sub Cable Assemblies) using a 15-pin high
density metal case D-sub male connector (plug).
Pin Signal
Function
Pin
Position
1 IN1+
2 IN1-
3 IN
RET
4 NC
Not
Connected
5 NC
Not
Connected
6 IN
RET
7 IN
2-
8 IN3+
9 IN
RET
10 IN4-
11 IN2+
12 IN
RET
13 IN3-
14 IN4+
15 GROUND
Ground
Table 3-9: Analog Input Cable - Pin Assignments
Advertising