EZWatch Pro 1.1u - Manual (Page 21)

Using the EZWatch Pro software 20
© 2001-2002 Automated Video Systems
Sequence clips: Executes the current sequence recorded video directly. Please refer to the
description
of the "Playback sequence video" icon.
4. Audio: Sets up audio recording. Allows the use of any available input and attachement to any video
window.
Note: Clicking on "Audio monitor" in the dialog, enables sound through the speakers for monitoring. It
is recomended
to be used as testing for audio, but not for recording, since this creates an echo effect on the
final video clip.
5. Remote: Sets up the remote user name and password, and the rights to available camera
operations.
6. Modem:
Standby: Clicking this icon, you can share the phone line that connects from the remote site with
another device.
Setup modem: Allows you to select the communication device to use with the software.
Disconnect user: When you finish communicating with the remote site, you need to instruct EZWatch
Pro to hang up the
phone line. This leaves the line free for other communication software or voice calls.
7. Network:
Setup connection: This function is set the maximum number of users that can connect via Tcp/Ip
protocol.
Connect ed user: Click this manual bar, and then you can find out the user that connects from remote
site via Tcp/Ip protocol.
If you will finish communicating with the Tcp/Ip remote site, you can click the "Break"
button.
If you would like to update the newest list of Tcp/Ip remote site, you can click the
"Refresh" button.
Disconnect user: When you finish the link with the remote site, you need to instruct EZWatch Pro to
disconnect the Tcp/Ip user.
8. View:
Date/time settings: Enables or disables display of the date/time on video window or video clips.
Toolbars: Enables or disables the t ool bars function. Click the left button of the mouse at this menu
bar or "Esc" key, the tool bar
will be behind. If you would like to return, just click the bar or the "Esc" key again. The
window will be returned to normal.