EZWatch Pro 1.1u - Manual (Page 41)

Using the EZWatch Pro software 40
© 2001-2002 Automated Video Systems
5. Under the "Time" box, select the time you want to reboot the system on schedule.
6. Under the "Date" menu, select "Daily" and select the days and weeks you what to reboot the
system automatically.
Tip: To reboot your computer after a specific amount of time, click on "After" instead and input
the interval in seconds. For example, for every 4 hours = 14400, 8 hours= 28800, and 12
hours = 43200.
7. Click on the "OK" button to save the settings. When the following message appears, click on
the "OK" button.
8. On the main dialog box, click on the "Service" menu, then "Create service". A dialog box will
popup with a confirmation. You might be informed that changes won't take effect until the nex
boot of your system.
9. Click on the "File" menu, then "Save settings". Click on the "OK" button to complete the
process.
Note: The EZBoot application will be visible on your task bar, where you can access it. In order
for the application to work properly, the "User login" must be disabled, and "Personal
data" of the software set. There are some steps that must be followed to allow auto reboot
of your computer:
For Windows 98SE, 2K and Me:
1. Install "Tweak UI" by selecting the file "tweakui.inf" from your EZWatch Pro software CD. This
file is located inside the "System" folder.