EZWatch Pro 1.1u - Manual (Page 3)

About this manual 2
© 2001-2002 Automated Video Systems
1 About this manual
1.1 About this manual
This is a help version of the EZWatch Pro system.
If you have any questions, or need any assistance please call:
1-866-241-3400 .
Also, you can contact us using the following information:
Email: [email protected]
Web:
www.ezwatchpro.com
This manual includes:
· A general description of the system and requirements .
· Directions for installing and setting up the hardware and software .
· Directions for using the EZWatch Pro system applications .
In addition, on-line help is available inside the EZModem and EZNetwork applications, as well as the bundled
applications. An On-line Help file can be found in the program group where you install the EZWatch Pro system
software. If you install the software to its default folder then you may access this by clicking on "Start", followed by
"Programs", then the "EZWatch Pro" program group and finally click on "Security On-line Help".
To save you time, at the beginning of each topic, please notice that there is a short summary of what that topic
covers. Also, an index and glossary are available towards the end of this manual for quick reference. If you can't
continue, please refer to
Frequently Asked Questions.
Manual conventions
Look for the following symbols to identify items of importance.
Warning: Requires extra attention.
Tip: Helpful tips.
Note: Valuable information.
Copyright © 2001-2003 Automated Video Systems. All rights reserved.
2 General information
2.1 FCC compliance statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
This device may not cause harmful interference, and this device must accept any interference
received,
including interference that may cause undesired operation.
FCC warning
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.