EZWatch Pro 1.1u - Manual (Page 26)

EZWatch Pro 25
© 2001-2002 Automated Video Systems
Note: You can't enable Standard recording function for a long-time. If you would like to record for a
long time, please the enable
Sequence recording.
5.7 Setting up the motion detection
You can setup the motion detection by doing the following steps:
·
Detection sensitivity: Move the slider right and left to adjust the detection sensitivity. Moving
it to the right, the detection
sensitivity increases. It means the function of motion detection will be started once there is a
very little bit of change on
the image.