EZWatch Pro 1.1u - Manual (Page 32)

EZWatch Pro 31
© 2001-2002 Automated Video Systems
1. Fill in the old password that was entered before. If this is a new installation, just ignore it.
2. Fill in the new password you want into the "Password" area.
3. Fill in the new password again to confirm it.
4. Select the functions that you would like to protect.
5. Click the "Ok" button.
From now on, the system will be under the influence of the password. You are required to enter the
correct password to see any image
on the screen until the "Password enable" is deselected.
Note: 1. If you forget the password you entered before, the only solution is to reinstall the software.
2. If the "Password enable" is not checked, the system will always be available for everyone.
3. The user name and password are case sensitive.
4. A password for the system consists of 1 to 20 characters, which could be letters, numbers,