EZWatch Pro 1.1u - Manual (Page 23)

Using the EZWatch Pro software 22
© 2001-2002 Automated Video Systems
Step1: Select the video camera number. If you install more than one Video Server Cards, please
scroll down to select.
Step2: Select the number into the "Video camera input" area and input the location into the "Name"
area. After you finish
the inputs, press the "Add" button. The new video channel will be saved and showed in the
dialog box of the "Open
video camera" dialog.
Step3: Delete a video camera. If you want to delete a video camera from the list, click the number of
the camera. The selected
camera will be selected. Then, you can press the "Delete" button. This video camera will be
removed from your camera list.
Step4: Exit the "Setup video camera" dialog. You can press the "Exit" button to close it.
5.5 Opening the video camera
To start using the EZWatch Pro software you must create a camera channel first, otherwise you will
not able to open the video window.
You can choose the appropriate video camera from the list of available cameras displayed by the
drop-down box and then you configure the various video settings, open a video camera,
motion detection , video display period, sound alarm , setup the recording schedule , motion sensitivity,
notification via pager, phone and auto-link to the remote site , etc.