EZWatch Pro 1.1u - Manual (Page 29)

Using the EZWatch Pro software 28
© 2001-2002 Automated Video Systems
Note: The sequence recording schedule can be enabled from the " Open video camera " dialog. The
motion detection schedule can be
set from the "
Motion detection settings " dialog.
To set the timetable for recording, follow these steps:
Setup the schedule Daily
1. Select "Daily".
2. Select the beginning time of recording from the "Start" area.
3. Select the ending time of recording from the "End" area.
4. After you finish the inputs, press the "Add" button. Your new timetable will be saved and showed in
the dialog box.
Setup the schedule Weekly
1. Select "Weekly".
2. Select the day/s you would like to setup.
3. Select the beginning time of recording from the "Start" area.
4. Select the ending time of recording from the "End" area.
5. After you finish the inputs, press the "Add" button. Your new timetable will be saved and showed in
the dialog box.
Setup the schedule for Period
1. Select "Period".