EZWatch Pro 1.1u - Manual (Page 43)

Using the EZWatch Pro software 42
© 2001-2002 Automated Video Systems
3. The dialog will display actual memory status information. Click on the "Settings" tab to set the
different memory parameters.
4. By default, "Show Cpu load on tray" and "Optimize when Memory/Cpu are below:" are
checked. You can set when to automatically free up memory by adjusting these settings.
Normally, a quater of Memory/Cpu levels are recommended. If you want a real time
report of your system's activity, check the"Show Cpu load" and "Show memory status".
This information will be displayed in every active window.