Product overview – KD Scientific Legato 130 Series User Manual

Page 10

Advertising
background image

10

Product Over view

K

D

S

L

e

g

a

to

1

3

0

U

s

e

r’s

M
a

n

u

a

l

KD Scientific Legato 130 Syringe Pump User’s Manual

Publication 5617-008 Rev D

The KD Scientific Legato 130 is the next generation

of syringe pumps. The series offers unparalleled ease

of use through the high resolution color touch screen user

interface. The full touch screen interface enables the user

to quickly create configurations and recall them for easy

use. The TFT color display presents all the pump

operating parameters on an easy to view run screen.

The password feature prevents accidental configuration

changes ensuring the programs integrity is retained.

Programs can also be set to be started on a time delay

for unattended operation.

An led light on the front panel makes it easy to see if the

pump is running. Once the pump starts to run, the display

shows the pump is running and the LED turns on. This will

make it easy to see the pump’s status.

The pumps are versatile and can be interconnected through

the RS485 interface. Up to 99 pumps can be linked

together through the RS485 interface. This interface is easy

to use provided each pump is assigned its own unique

pump address.

For limited laboratory space the Legato 130 control box

can be placed on its side to reduce the footprint by 55%.

The display also tilts with the change to allow the user

operate the pump vertically.

Notifications and error messages are displayed for the

user to acknowledge, eliminating any guesswork about

problems.

Flow performance is optimized with a small step angle

stepping motor that drives a precision lead screw and

pusher block. The syringe mechanism is easy to use and

securely holds the syringes for smooth flow performance.

Advanced microstepping techniques are employed to

further reduce the step angle to eliminate flow pulsation.

The accuracy is ±0.5% with 0.05% reproducibility. A

wide dynamic flow range can be programmed into the

pump. Flow rates are selectable with user selected

engineering units from ml, µl, nl pl, and hours, minutes

and seconds.

Up to 5 kg (11 lbs) of linear force is available. This force

is user adjustable to ensure the right force is applied for

the various syringe sizes..

phone

508.429.6809

fax

508.893.0160

e-mail

[email protected]

web

www.kdscientific.com

Product Overview

Advertising