KD Scientific Legato 130 Series - Manual (Page 16)

16
phone
508.429.6809
fax
508.893.0160
e-mail
[email protected]
web
www.kdscientific.com
16
Configuring the KDS Legato 130
If you select infuse/withdraw or
withdraw/infuse mode the configuration
screen will have the continuous mode selection.
(Press to toggle on/off)
Infuse/Withdraw models only. Continuous flow is an
option on the display. In continuous mode, the pump will
infuse then withdraw continuously or vice versa
depending on which mode is selected. The pump will
switch to withdrawal based on the target volume entered.
The total infuse volume will be displayed on the run
screen as well as total elapsed time.
The KDS Legato 130 program is easy to set up.
The Legato 130 is easily configured. When the
unit is powered up, the Configuration Screen will
be displayed.
Configuring the KDS Legato 130
Select Mode
Select Flow Rates
Select Syringe Manufacturer Size
Select Target Volume
Fast Reverse Fast Forward
Starts Pump
& Jumps to
Run Screen
Preview
Program
Jumps to
Run Screen
General
Pump
Parameter
Set-Up
Mode Selection
In the Configuration Display select mode
(available modes depend on the pump model)
• Infuse
• Withdraw
• Infuse/Withdraw
• Infuse/Withdraw (continuous)
• Withdraw/Infuse
• Withdraw/Infuse (continuous)
• Custom program
The Mode Selection Screen will be displayed. The
available modes will be displayed based on the
model of syringe pump.
Press the Mode to select
Press and hold to activate
K
D
S
L
e
g
a
to
1
3
0
U
s
e
r’s
M
a
n
u
a
l
KD Scientific Legato 130 Syringe Pump User’s Manual
Publication 5617-008 Rev D