KD Scientific Legato 130 Series - Manual (Page 43)

43
Operating the KDS Legato 130
K
D
S
L
e
g
a
to
1
3
0
U
s
e
r’s
M
a
n
u
a
l
KD Scientific Legato 130 Syringe Pump User’s Manual
Publication 5617-008 Rev D
I/O EVENT TRIGGERS
The KDS Legato 130 pumps permit easy connection to
external I/O devices via a variety of interfaces, including
a built-in 15-pin D-sub connector. The KDS Legato 130
software incorporates simple commands for
incorporating I/O controls into your pump Programs.
Integrated commands for control of general trigger
signals are integrated in the software. The following
procedure describes the use of the Advanced Options
I/O commands. Following the procedure is a description
of the selection menu options for each of the I/O
command types. Details for the electrical connection
controls and pin-out description for the 15-pin User I/O
Connector are provided in Appendix C of this manual.
The KDS Legato 130 manages trigger events through
specific pins on the I/O Connector port on the back of
the pump. The following details define
pin logic:
• Trigger is communicated via Pin 4.
• Event signals are communicated via Pin 2.
phone
508.429.6809
fax
508.893.0160
e-mail
[email protected]
web
www.kdscientific.com