KD Scientific Legato 130 Series - Manual (Page 68)

68
Appendices
K
D
S
L
e
g
a
to
1
3
0
U
s
e
r’s
M
a
n
u
a
l
KD Scientific Legato 130 Syringe Pump User’s Manual
Publication 5617-008 Rev D
TROUBLESHOOTING
1. Infusion Accuracy
To ensure infusion accuracy always use new syringe(s)
and measure syringe bore diameter and enter actual
dimensions in millimeters (mm) using the Custom Syringe
entry option. Additionally, make sure that the guide rods
and lead screw are properly lubricated.
✐
NOTE: It is recommended that you save
your programs periodically by uploading
them to a PC.
KDS Legato 130 Display Error Messages
2. Out of Range
A value was entered or encountered in a pump program
that was beyond the pump’s limits.
3. Power Failure Notification
If power to the pump is interrupted during operation, an
alarm will sound to alert the user to the interruption.
When power is restored, an onscreen message is
displayed to indicate the interruption.
4. Unit Won’t Power Up
Verify the the Power Source Switch on the rear of the
pump is set to DC-IN if powering through power supply
or RS-485 if powering in a chain.
The KDS Legato 130 Pump will notify you of a power failure with a message
when power is restored
phone
508.429.6809
fax
508.893.0160
e-mail
[email protected]
web
www.kdscientific.com