Lenze Function library LenzeIO1000Drv - Manual (Page 10)

Function library "LenzeIo1000Drv"
Project planning concept
Minimum configuration
10
L
DMS 1.0 EN - 07/2011 - TD05
3.3 Minimum configuration
For implementing the I/O system, a minimum configuration must be carried out. It consists
of a parameterisation block L_io1000ParPDO15 for parameterising the communication
relationships and a process data block L_io1000Data15 for evaluation the input/output
information.
 The parameterisation block must be connected to the process data block as follows:
 The parameterisation block does not have to be executed in the same task as the
process data block. In this case, the outputs of the parameterisation block must be
connected to the inputs of the process data block.