Lenze Function library LenzeIO1000Drv - Manual (Page 39)

DMS 1.0 EN - 07/2011 - TD05
L
39
Function library "LenzeIo1000Drv"
Function blocks
L_io1000ParRestore - Load default setting in I/O system
Sequence
For accepting the reset communication setting, the NMT command "Reset Node" is sent to
the I/O system. The I/O system re-initialises and returns a boot-up telegram as soon as it is
in the "Pre-Operational" status again. Only if the FB receives this boot-up telegram, loading
of the default setting is completed.

Note!
After sending the NMT command "Reset Node" to the I/O system, the FB has to
receive the boot-up telegram within 10 s, otherwise a timeout error will be
output at the dnState output.