Lenze PC-based Automation Industrial PC - Manual (Page 119)

2.5 EN - 01/2012
L
119
Industrial PC | Parameter setting & configuration
Visualisation with »VisiWinNET®«
Configuration of the OPC tunnel
13.4.1 Local visualisation (integrated control system)
[13-1] Local visualisation on a Lenze IPC control system
 The local »VisiWinNET®« application on the Lenze IPC (controller) accesses the
corresponding OPC server via the local OPC tunnel.
 The oct.xml configuration file in the \storage\OCT directory is used to configure
the OPC tunnel.

Note!
For a local visualisation on the IPC, the configuration file need not be adapted!
Do not change the standard settings of the configuration file.