4 user interface, User interface – Lenze PC-based Automation Industrial PC User Manual
Page 49
Advertising
2.5 EN - 01/2012
L
49
Industrial PC | Parameter setting & configuration
Web-based parameterisation with »WebConfig«
User interface
7.4
User interface
The user interface of the »WebConfig« is divided into the following areas
-
:
Note!
The representation of the user interface in area
depends on the respective
system configuration! The example shows an Industrial PC including the
following extension cards: MC-ETC in slot 1 and MC-CAN2 in slot 2.
Advertising