Lenze PC-based Automation Industrial PC - Manual (Page 88)

Industrial PC | Parameter setting & configuration
Remote maintenance and diagnostics
FTP connection
88
L
2.5 EN - 01/2012
12.3 FTP connection
The File Transfer Protocol (FTP) is a network protocol for the transfer of data in networks.
FTP enables the exchange of files between the Industrial PC and other PCs. Via the FTP
connection the user can access the files of the IPC's Compact Flash card.
12.3.1 FTP settings with the web-based parameterisation
The settings of the FTP connection can be managed via the web-based parameterisation.
From codes 171 to 174 the FTP access for the Industrial PC can be activated and user rights
can be specified. Click the Remote control button to call the FTP settings:
 Code 171 activates authentication of the FTP user,
 Code 172 enables log-on of the anonymous FTP user "Anonymous",
 Code 173 activates the upload of files by anonymous FTP users,
 Code 174 activates the FTP service.
The user management, the User management button, specifies the following:
– The Windows® CE users who may use the FTP access.
– Which authorisations the Windows® CE users have.
The authorisations are required to be able to connect to the Industrial PC via FTP.

Note!
FTP must be used for system-diagnostic purposes only. Deleting or changing
system files causes malfunctions of the Industrial PC!

Note!
For accepting the FTP settings, the FTP server has to be restarted:
Click the Device commands button.
• Send the "Stop FTP server" command. The FTP server is stopped.
• Send the "Start FTP server" command. The FTP server is started with the
changed settings.
• Send the "Update FTP server" command to update information to the FTP
server.