Lenze PC-based Automation Industrial PC - Manual (Page 84)

Industrial PC | Parameter setting & configuration
Remote maintenance and diagnostics
Remote Access Service (RAS) connection
84
L
2.5 EN - 01/2012
12.1.2 RAS settings with the web-based parameterisation
Now the IPC has two IP addresses and can be reached via Ethernet and RAS.
The Industrial PC allocates a generated IP address to the clients of the RAS connection.
 The server IP address is the address of the Industrial PC,
 The client IP address is the address of the client PC.
The RAS server is activated in the standard setting on the Industrial PC, so that the
reception of calls does not require manual settings. The standard settings can be changed
in the web-based parameterisation.

How to change the connection settings in the web-based parameterisation:
1. Select the Industrial PC the connection settings of which are to be changed,
2. If the Industrial PC is not connected, right-click on the IPC and select Go online,
3. Click the Remote control button.
• The RAS settings of the Industrial PC can be configured via codes 175 to 179:
Codes
 Code 175 activates the RAS server,
 Code 176 selects the hardware for the RAS connection,
 Code 178 selects the baud rate,
 Code 179 activates routing.