3 terminology used, Industrial pc | parameter setting & configuration – Lenze PC-based Automation Industrial PC User Manual
Page 14
Advertising
Industrial PC | Parameter setting & configuration
About this documentation
Terminology used
14
L
2.5 EN - 01/2012
1.3
Terminology used
Term
Meaning
»Engineer«
Lenze engineering tools which support you throughout the whole life cycle of a
machine with an Industrial PC - from planning to maintenance.
»Global Drive Control« / »GDC«
»PLC Designer«
Code
"Container" for one or several parameters used for parameter setting or
monitoring Lenze Servo Drives.
Subcode
If a code contains several parameters, the individual parameters are stored
under "subcodes".
This manual uses a slash "/" as a separator between code and subcode
(e.g. "C00118/3").
IPC
Industrial PC
PLC
Programmable Logic Controller
Advertising