3 start of the web-based parameterisation, 1 start at the engineering pc, 2 start at the industrial pc – Lenze PC-based Automation Industrial PC User Manual
Page 47: Industrial pc | parameter setting & configuration
2.5 EN - 01/2012
L
47
Industrial PC | Parameter setting & configuration
Web-based parameterisation with »WebConfig«
Start of the web-based parameterisation
7.3
Start of the web-based parameterisation
7.3.1
Start at the Engineering PC
Start a browser at the Engineering PC and enter the IP address of the Industrial PC.
– The dialog box for entering the connection data appears:
.
1. Enter<User name:password>. As default setting, admin:admin is preselected. Any user
set up on the Industrial PC can log in.
2. Confirm with OK .
3. Afterwards the user interface of the web-based parameterisation appears.
7.3.2
Start at the Industrial PC
After connection to the current supply, the Industrial PC starts automatically. If no external
keyboard has been connected, the on-screen keyboard can be shown via the function key
<F1>.
Change to <Shift+F4> in the Control Panel.