Schwank STW-JZ1 User Manual

Page 12

Advertising
background image

12

STW-JZ / IW I&O Manual

IM101229

RL: 12A- BA

RD: DEC 2010

*

RECOMMENDED MOUNTING HEIGHTS are typical to provide optimum comfort in general

space heating applications. Variance to these typical heights can occur in some applications:



Higher mounting heights due to structure or application requirements



Lower mounting heights for area or ‘spot’ heat, or in areas with greater infiltration losses

(near overhead doors, etc)

IMPORTANT: Single or multiple heater placement must be such that continous

operation of heater(s) will not cause combustible material or materials in stor-

age to reach a temperature in excess of ambient temperature plus 90F° (50C°).

It is the installer’s responsibility to ensure that building materials with a

low heat tolerance which may degrade at lower temperatures are pro-

tected to prevent degradation. Examples of low heat tolerance materials

include vinyl siding, fabrics, some plastics, filmy materials, etc.

Refer to “Clearance to Combustibles” information on pages 6 to 8, and

Figure 1 and Table 1.

MODEL



MOUNTING

HEIGHT

ft (m)

MAXIMUM

DISTANCE

BETWEEN

HEATERS

ft (m)

DISTANCE – OUTSIDE WALL

TO HEATER LONG AXIS

(PARALLEL TO WALL) IN “FEET”

HORIZONTAL

ft (m)

ANGLE

STW-JZ / IW 200

18 – 25 (6 - 8)

50 (15)

17 – 25 (5 - 8)




COMBUSTIBLE

CLEARANCE

BEHIND

(refer to Table 1)

STW-JZ / IW 175

18 – 25 (6 - 8)

50 (15)

17 – 25 (5 - 8)

STW-JZ / IW 155

16 – 21 (5 - 7)

45 (14)

15 – 20 (5 - 7)

STW-JZ / IW 130

15 – 21 (5 - 7)

40 (12)

15 – 20 (5 - 7)

STW-JZ / IW 110

13 – 19 (4 - 6)

35 (11)

13 – 18 (4 - 6)

STW-JZ / IW 80

10 – 16 (3 - 5)

30 (9)

12 – 16 (4 - 5)

STW-JZ / IW 60

8 – 14 (2.5 - 5)

25 (8)

11 – 15 (3.4 - 5)

STW-JZ / IW 45

8 – 12 (2.5 - 4)

20 (6)

8 – 12 (2.5 - 4)

TABLE 2: GUIDELINES FOR HEATER PLACEMENT

7. SYSTEMS

INCORPORATING

90° ELBOWS AND 180° ELBOWS

The radiant tube heater can be installed in configurations as illustrated in FIGURE 4. (below)
with a maximum of two 90° elbows per heater. The use of elbows reduces the total maximum
vent allowable. (See Section 11 : Flue venting)

Advertising