Regency Horizon HZ40E Medium Gas Fireplace - Manual (Page 44)

44
Regency Horizon™ HZ40E-2 Gas Fireplace
INSTALLATION
5) Loosen 2 screws at the back of the burner to release it.
6) Remove the burner by sliding it to the right - then lift out.
7) Remove the left access plate by removing 8 screws - see locations below.
8) Once the top panel is removed - the left side panel will be accessible.
Remove 3 screws from the left side access panel in locations shown
below.
Note: Some components have been removed for illustration purposes.
9) Install the fan control module (FCM) through the opening created by the
removed left side access panel.
10) Install the fan control module (FCM) into the bracket as shown below.
Left side access