Regency Horizon HZ40E Medium Gas Fireplace - Manual (Page 56)

56
Regency Horizon™ HZ40E-2 Gas Fireplace
INSTALLATION
3) To install the 4 pc. faceplate - hook brackets (located on back of
faceplate) over the two middle tabs on the glass door frame.
If thicker fi nishing materials are used - the faceplate may be
adjusted out - up to 1/2".
Important: 1/2" gap required between faceplate and
fi nished wall when using part #256-924, 256-926, 256-
927 (4 pc. faceplate).
1) If installing optional mesh glass guard - See optional "Mesh Glass
Guard" installation instructions.
2) Install brackets onto the back of the faceplate - 3 screws for each
bracket in locations shown below.
Hook bracket over
these tabs
Final Install
+1/4"
+1/2"
Use fi rst notch in bracket
for standard installation
4 PIECE FACEPLATE INSTALLATION