Reference materials – Rockwell Automation 1395 DC Drive, 800-1250 Hp, FRN 5.XX-9.30 User Manual
Page 186
7
Chapter
7-1
Reference Materials
Introduction
This chapter contains reference materials intended to provide additional
information pertaining to the 1395 such as:
•
Configuration Parameter lists
•
Start-up Parameter Tables
•
An alphabetical listing of all parameters.
•
Glossary
Configuration Parameter List
Record all configuration and linking as finalized during start-up in the
following tables:
Table 7.A
Fast Source Parameters (Configuration & Linking)
Parameter
TREND 1 OUTPUT
TREND 2 OUTPUT
TREND 3 OUTPUT
TREND 4 OUTPUT
SP OUTPUT 1
SP OUTPUT 2
SP OUTPUT 3
SP OUTPUT 4
SP OUTPUT 5
TREND 1 INPUT
TREND 2 INPUT
TREND 3 INPUT
TREND 4 INPUT
LOGIC STATUS
BIT 0 = FAULT FIELD 0
BIT 1 = FAULT FIELD 1
BIT 2 = ACTIVE LOGIC COMMAND 0
BIT 3 = ACTIVE LOGIC COMMAND 1
BIT 4 = CONTACTOR CLOSE
BIT 5 = DRIVE RUNNING
BIT 6 = RUNNING REVERSE
BIT 7 = READY
BIT 8 = AT CURRENT SPEED
BIT 9 = SET SPEED
BIT 10 = AT ZERO SPEED
BIT 11 = AT SPEED 1
BIT 12 = AT SPEED 2
BIT 13 = AT SPEED 3
BIT 14 = AT SPEED 4
BIT 15 = AT SPEED 5
DRIVE FAULT
PRE RAMP VELOCITY REFERENCE
RAMP VELOCITY REFERENCE
Description
Linked To Parameter
1
2
3
4
10
11
12
13
14
50
51
52
53
100
101
102
103