Rockwell Automation 1395 DC Drive, 800-1250 Hp, FRN 5.XX-9.30 - Manual (Page 91)

Chapter 4
Installation
4-26
Analog/Digital Output
Figure 4.16 shows typical analog and digital output connections.
Figure 4.16
Typical Output Connections
61
62
TB3
Digital Output Connections
IMPORTANT: Connect
shield to drive end only.
Other end is to be insu-
lated and left floating.
41
42
TB3
ARM. CURRENT FDBK.
Analog Output Connections
55
54
ARM. CURRENT FDBK.
+
–
0 to + 10VDC,
1mA Maximum
AT ZERO SPEED
DRIVE RUNNING
57
56 DRIVE READY
AT CURRENT LIMIT
58 AT SET SPEED
0 VOLTS COMMON
+24V DC HIGH
CR*
PL*
CR*
External 24VDC
Power Supply
* External to the Drive
Node Adapter Board
The Node Adapter Board is connected to Microbus Port B and is not
preconfigured. Refer to the Node Adapter manual for configuration
information.
Multi-Communications Adapter Board
The Multi-Communications Board is not preconfigured. Refer to the Multi
Communications Adapter manual for configuration and installation
information.