Rockwell Automation 1747-PCINT API Software for 1746 I/O - Manual (Page 132)

6–78 Library of Routines OC_WaitForEos
Publication 1747-6.5.3 June 1998
OC_WaitForEos Blocks the calling thread until an end-of-scan (EOS) notification is received from
the scanner or
msTimeout milliseconds have elapsed.
Syntax:
int OC_WaitForEos(HANDLE handle, DWORD msTimeout)
Parameters:
Description:
If an EOS message has been received since the last OCMSG_EOS message was retrieved with the
OC_PollScanner function, OC_WaitForEos returns SUCCESS immediately.
You can use this function to synchronize a control application with the I/O scan. See the
OC_EnableEOSNotify function.
Return Value:
Considerations:
Supported in the Windows NT API library only.
Parameter: Description:
handle Must be a valid handle returned from OC_OpenScanner
msTimeout
Specifies the number of milliseconds to wait
Set to INFINITE to wait forever
Name: Value: Description:
SUCCESS
0
an EOS message was received
ERR_RESPONSE 10
msTimeout milliseconds elapsed without an EOS
ERR_OCACCESS
2
handle does not have access to scanner