Rockwell Automation 1746-NT8 SLC 500 Thermocouple/mV Analog Input Module User Manual User Manual
Page 25
Advertising
Publication 1746-UM022B-EN-P - January 2005
Installing And Wiring Your Module 2-7
Terminal block diagram with CJC sensors
ATTENTION
Possible Equipment Operation
Before wiring your module, always disconnect
power from the SLC 500 system and from any other
source to the module.
Failure to observe this precaution can cause
unintended equipment operation and damage.
R ecommended Torque:
wiring screws: 0.25 Nm (2.2 in-lb)
release screws: 0.25 Nm (2.2 in-lb)
Terminal Block
Release Screws
CJC Sensors
CJC Sensors
Terminal Block
Release Screws
Advertising