Rockwell Automation 1738 Assembly Connections for POINT I/O and ArmorPOINT I/O EtherNet/IP Adapters User Manual
Page 20
Advertising
Publication 1734-UM016A-EN-P - October 2010
14 Using an Assembly Connection
3. Right click the targeted adapter and select Insert Connection to display
the Connection Properties dialog.
4. On the Connection tab of this dialog, select the connection from the
Connection Name pull-down (for example, Exclusive Owner and
Listen-Only connections). Listen-Only connections are only accepted if
an Exclusive Owner connection already exists.
Advertising
This manual is related to the following products: