Rockwell Automation 1738 Assembly Connections for POINT I/O and ArmorPOINT I/O EtherNet/IP Adapters - Manual (Page 55)

Publication 1734-UM016A-EN-P - October 2010
1734/1738 I/O Module Assembly Information 49
default produced assembly. For more information regarding the specific fields
of these assemblies, consult the product's user manual.
Configuration Assembly Instance 123
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0 Counter Configuration
1 Filter Selection
2 Decimal Position
3 Reserved
4 Time Base (low byte)
5 Time Base (high byte)
6 Gate Interval
7 Scalar
8 Rollover Value [Low Byte]
9 Rollover Value [1]
10 Rollover Value [2]
11 Rollover Value [High Byte]
12 Preset Value [Low Byte]
13 Preset Value [1]
14 Preset Value [2]
15 Preset Value [High Byte]
16 Counter Control SSV
17 Reserved (set to 0)
Produced Input Data Assembly 102
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0 Stored Channel Data [Low Byte]
1 Stored Channel Data [1]
2 Stored Channel Data [2]
3 Stored Channel Data [High Byte]
4 Status (Low Byte)
5 Status (High Byte)
Consumed Output Data Assembly 105
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0 Counter Control