Rockwell Automation 1732E-OB8M8SR EtherNet/IP Dual Port 8-Point SOE Input and Scheduled Output Modules UM User Manual
Rockwell Automation Equipment
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- 1732E-UM003B-EN-P 1732E ArmorBlock EtherNet/IP Dual Port 8-Point Sequence of Events Input and Scheduled Output Modules User Manual
- Preface
- Summary of Changes
- Table of Contents
- 1 - About ArmorBlock Modules
- 2 - Module Overview and Features
- 3 - Use the Modules in an ArmorBlock System
- 4 - Install Your Module
- 5 - Configure the Module for Your EtherNet/IP Network
- 6 - Configure the Module Using RSLogix 5000 Software
- Configure the Module Using RSLogix 5000 Software
- Introduction
- Set Up the Hardware
- Create the Example Application
- Configure Your I/O Module
- Overview of the Configuration Process through RSLogix 5000
- Add a New Bridge and Module to Your RSLogix 5000 Project
- Use the Default Configuration
- Change the Default Configuration
- Download Your Configuration
- Edit Your Configuration
- Access Module Data in RSLogix 5000 Software
- Configure RSLogix 5000 and the 1756-EN2T Communication Module for CIP Sync
- Chapter Summary and What’s Next
- Configure the Module Using RSLogix 5000 Software
- 7 - Common Features of the 1732E-IB8M8SOER and 1732E-OB8M8SR Modules
- 8 - Specific Features of the 1732E-IB8M8SOER Sequence of Events Input Module
- 9 - Specific Features of the 1732E-OB8M8SR Scheduled Output Module
- 10 - Use the Sequence of Events Input and Scheduled Output Modules
- Use the Sequence of Events Input and Scheduled Output Modules
- Introduction
- Overview
- Use the Sequence of Events Input Module
- How Does 1732E-IB8M8SOER Store Timestamp Data?
- Use Timestamp Latching
- Use Timestamp Capture
- Operational Modes
- Manage the Data
- Module Sends Data to the Controller
- Copy Relevant Input Data to a Separate Data Structure
- Acknowledge Timestamp Latching Timestamp Data
- Sort the Data
- Clear All Data From the Module Buffer At Once
- Propagate a Signal From Input Pin to EtherNet
- Per Point Mode of Operation
- Use the Scheduled Output Module
- Chapter Summary and What’s Next
- Use the Sequence of Events Input and Scheduled Output Modules
- 11 - Troubleshoot the Module
- 12 - Interpret Status Indicators
- A - Specifications
- B - Module Tags
- C - Data Tables
- D - Connect to Networks via Ethernet Interface
- Connect to Networks via Ethernet Interface
- E - 1732E ArmorBlock Embedded Web Server
- Index
- Back Cover