Rockwell Automation 1732E-OB8M8SR EtherNet/IP Dual Port 8-Point SOE Input and Scheduled Output Modules UM - Manual (Page 56)

46 Rockwell Automation Publication 1732E-UM003B-EN-E - March 2014
Chapter 6 Configure the Module Using RSLogix 5000 Software
• For RSLogix 5000 programming instructions, refer to RSLogix 5000
Getting Results, publication no. 9399-RLD300GR .
• For ControlLogix controller information, refer to ControlLogix System
User Manual, publication no. 1756-UM001 .
Configure RSLogix 5000 and
the 1756-EN2T
Communication Module for
CIP Sync If you are using RSLogix 5000 software version 17, follow these steps to
configure the 1756-EN2T communication module to be the PTP (CIP Sync)
master clock.
1. In your web browser, go to the Rockwell Automation Sample Code
Library at
http://samplecode.rockwellautomation.com/idc/groups/
public/documents/webassets/sc_home_page.hcst.
The Search Our Sample Code Library page appears.
2. In the Filename/ID field enter MMS_048132.
3. Click Search.
The 1732E ArmorBlock EtherNet/IP Dual Port 8-Point Sequence of
Events Input and Scheduled Output Modulesmodule synchronizes to the
grandmaster clock as a child module as described in the document.
If you are using RSLogix 5000 version 18 or greater, refer to publication
IA-AT003 for instructions on configuring the 1756-EN2T communication
module and the ContolLogix processor so that the processor can function as the
PTP (CIP Sync) master clock.
Chapter Summary and
What’s Next In this chapter, you read about configuring your module in RSLogix 5000. The
next chapter describes the module features.